Radon Skeen Trail AL 7.0

« Alloy ain’t dead! ». What a brilliant start for our new SKEEN TRAIL AL 7.0. Introduced in 2022, it is already well on its way to becoming a classic. The modern and elegantly hydroformed aluminium frame convinces with modern geometry and offers state-of-the-art frame standards.

---

Highlights of the SKEEN TRAIL AL 7.0

The RockShox Pike Select fork with Charger RC cartridge and large DebonAir+ air chamber offers 130mm at the front and will sweeten your mood especially on rough trails. The combination with the RockShox Deluxe Select+ ensures a balanced chassis and, thanks to the platform, is ideally suited for long tours as well as technical single trails. The groupset is a mix of Shimano’s high-quality DEORE and SLX series: with 12 gears and a large 10-51 tooth cassette, you have a huge range on board and therefore always the perfect gear at hand, whether it’s a long climb or a fast flow trail. Also on board is the powerful Magura MT Thirty Custom – four pistons at the front and two pistons at the rear result in a finely controllable and powerful brake for every situation. On the SUNringlé Düroc 35 with a wide 31mm inner rim width, we fit the trail classic Schwalbe Nobby Nic in 2.4″ width. If you find yourself at the trailhead after a hard-fought uphill, you can comfortably lower the adjustable dropper seatpost from the handlebars, set all suspension elements to open and take off into the trail fun. We wish you lots of downhill fun with the SKEEN TRAIL AL 7.0!

---

The SKEEN TRAIL AL Family

Made for the real terrain, but also for many kilometres and altitude metres. Our SKEEN TRAIL AL is ready to accompany you on trail adventures of all kinds, whether epic tours, alpine crossings or first attempts in the bike park. With 130mm travel at the front and 120mm at the rear, you have a firm but comfortable chassis at your disposal. The geometry is sporty but not too progressive, so you can master long climbs just as easily as demanding downhills. Well-rolling tires and a wide range of gears make long tours easier.

---

The SKEEN TRAIL AL Frame

The frame of the SKEEN TRAIL AL is geometrically based on its tried-and-tested carbon brother, with a steep seat and flat steering angle enabling fast climbing on the one hand and full control in steep descents on the other. All SKEEN TRAIL bikes roll on large, roll-over-friendly 29″ wheels, the cables are routed inside the frame for a clean look and the gears are uncompromisingly designed for single drives. The SKEEN TRAIL AL offers 130mm of travel at the front and 120mm at the rear.

---

Please note that pedals are not included! Caution, image differs from the original!

---

Due to the COVID-19 pandemic and the resulting persistent disturbances in global supply chains, the illustrations and equipment information may differ from the actual bicycles.
The manufacturer reserves the right to replace components with components of equal quality.

---

---